¡¡

 

 

¡¡
 
 


 Foamed polystyrene insulating layer with the thickness of 100m/m in the center, steel wire truss coated with zinc of 3m/m(3.8mm) between the insulating layer is pinned at 2`` intervals, at both sides of which forms up at 5Cm X 5Cm(5Cm X 10Cm) intervals with the wire mesh coated with zinc of 3m/m(3.8mm) that is at fine-spun 50m(100m)intervals. So the whole points of contact in all steel wires is joined in a spot welding, which is a panel of 2.4m(4m) full length, 1.2m width, 60~200m/m thickness.
At the first time, it will be sprayed or hand plastered on the both sides in a thickness of 7m/m~10m/m, and finished with first coat and double second coat of 35m/m~30m/m thickness, which produces the structure with the total thickness of 12Cm~13Cm, the self-load of 120kg/m2, and the strong earthquake proofing.


1. Steel wire : steel wire with a diameter of ¨ª3mm(3.8mm) licensed by KSM O802 and coated with zinc     in a tensile strength of 60~120kg/Cm2
2. Foamed polystyrene : licensed by KSM 3802 with a specific gravity of over 0.015kg/Cm2. (Over      0.015kg/Cm2 is for the manufacturing order)
3. Strength of Mortar : Normally 1:3 (70kg/Cm2)


1. Thermal Insulation
    The EPS squeezing foaming polystyrene that is famous for the internal thermal insulation is used  
    and reduces the loss of heat. It also makes the comfortable indoor space regardless of temperature
     variation in the winter season.

2. Fireproofing
    It has passed the 120 minutes fireproofing test of national construction institute and has also been     approved as the fireproofing materials for internal & external construction stuffs.

3. Moisture proofing
    As we have used the high performance foaming polystyrene 100m/m of low absorptiveness, it     shows an excellent prevention against the condensation on the wall. (As for the usage of external     wall, the exterior on the external wall needs the waterproofing mortar)

4. Soundproofing
    On the base of sound insulation performance test, it has shown a distinguished feature of     soundproofing among others. Especially, it shows a heightened operation capability with both sides     plasterboard.

5. Lightweight
    It only weighs a quarter of the masonry wall, which alleviates the fixed load of structure and also     highly recommended in the enlargement of old buildings. (masonry 450Kg, panel 120Kg)

6. Structure
    It is used for every construction like residence and apartment approved by national construction     institute and 4 U. S. A agencies of ICBO, BOCA, SBCC. Especially, it is highly recommended the     higher the building is and the longer its span is.

7. Variety
    It can be designed in a varied form without any professional knowledge, and fits for the round-typed     materials as increasing 10% indoor space compared with masonry structure.

8. Economical Efficiency
    As it is a standardized factory product, easy to construct, and allows us to execute the masonry,     insulation, plastering at the same time, it surely reduces the construction time down to a third.

9. Shortening of Construction Time
    As we said above, it is easy to execute and able to curtail the construction expense with the high     efficiency in thermal insulation. It also boils down the framing expense as a lightweight material,     which is definitely economically effective.


Design
1. It is freely handled & framed up to any forms in the spot with the easiness of cutting and processing     for the plane and solid design.
2. It has a versatile application to almost all construction architecture, especially for R¡¤C structure,     interior & exterior wall, single family & row house, apartment, condominium.
3. It can be diversely designed for the soundproofing wall in the additive building of weakened structure     like school, gym, factory, farmstead, cooling & thermal insulating warehouse.
4. As it is standardized as a strengthened but lightweight, thin panel for construction
    structure, it has greatly increased the available floor space (10%).
5. As it weighs only a quarter of it compared with the self load of masonry wall, it sharply curtails the     fixed load, which eases off the burden of ground-making and also renders service to the perfect     construction with a thermal insulation.

Construction
1. After setting up the fixed metallic materials upon the foundation concrete, the panel is to be in-     between stabilized.
2. Tie up the connecting line of #22, every kind of strengthened mesh between concrete and panel,     panel and panel.
3. Lay under the ground the essential electrical pipes and all types of arrangements pipe.
4. Finish with the examination to the assemblage, horizontality and verticality, reinforcement and pipe     arrangement status.
5. Finish the global body with the first time mechanism of spraying cement mortar, and with the     second time hand plastering of skimming coating.
6. It can be finalized with every type of materials in correspondence to its usage like pitching, tiling,     marbling, paper hanging, painting etc.
7. If used for more than second floor building, the construction procedure is like this: 1 assemble the     lower part wall, 2 lay down the foundation concrete, 3 assemble the upper part wall, 4 mechanical     plastering on the lower part, 5 spraying after laying down the foundation concrete on the upper part     (this procedure is repeated from 1 to 5).